WallboxPlayer.com

Downloads

Firmware Downloads

* Note: Installing updates is at own risk. Much care was taken to make the process smooth and avoid issues. If updates ‘brick’ a WallboxPlayer or if you want me to do the update it can be shipped to me for proper latest SW update, I will only charge the shipping costs back to you. 

** Inquire for versions with Wifi (and Spotify)

Instructions:

Versions

  • V10 Spotify implemented and Songlist page 
  • V11 Labeling, AutoPlay startup, FW160, SD flash; V11.9 bugfixes
  • V12 Dial devices, Rock507, 3020, AlbumPlay
  • V13 Platform release with pulse and stability fixes, screensave, 
  • V14 MP3 tag update, MP3NumberPlayMode and stability fixes, Packard support, faster startup, control relay choices
  • V15 Setup streamlined
  • UNTIL SOFTWARE V12: USING THE OVER THE AIR (GREEN VERSIONS BELOW - FOR WIFI MODELS) FUNCTIONALITY UP TO RELEASE V12
  • Download code (unzip the zip and store the bin file) below and save on your computer
  • On the WallboxPlayer longpress button to Setup, then in the menu wait for "TOOLS" to come up and then select "UPDATEMODE".
  • The device will now restart and enter update mode (look at display). Open a web browser on your computer where you have saved the bin file
  • Enter the URL with IP address of your player on the network with /update added (e.g. 192.168.1.224/update) as indicated on the WallboxPlayer display
  • You should now get the OTA-Elegant page - select "upload code:" and choose the bin file that you saved on your computer
  • After uploading, device will restart with new code. After re-startup, system will show release/version number/date
  • Restart the WallboxPlayer and check all configurations settings (as location of stored config may have changed)
  • FROM SOFTWARE V12 UP: USING THE ONBOARD (2ND) DATA SDCARD SLOT (RELEASE V12 AND UP)
  • Note: The music SD (under the blue player) can stay in the WallboxPlayer
  • Download code (unzip the zip and store the bin file) below and save on your computer
  • Copy the bin file (if needed rename to wallboxplayer.bin) onto a FAT32 formatted (max 16GB) SD card (must be in the root)
  • Switch off WallboxPlayer, insert the SD card with the bin file and switch the WallboxPlayer on
  • The display will show if the update is ongoing (2 minutes), do not switch off the device until ready!
  • After updating to 100%, the device will restart with the new software update. After WallboxPlayer startup, system will show release/version number/date
  • Restart the WallboxPlayer, remove the SD card with the bin file from the cardslot (the bin has been renamed to bak)
  • Check all configurations settings with Setup ! (as location of stored config, especially Wallbox-type may have changed)
Download
WallboxPlayer V15.0 (zip 221kB with bin 445kB)

Contact Info

jhmheuvel1@gmail.com

+31 6 2335 7060

+31 6 2335 7060

KvK: 90242629

Bank: NL97 INGB 0104 1745 28 (BIC: INGBNL2A)

About

About

Contact

Privacy